AL-6XN Tubing

All AL-6XN tubing will meet dimensional criteria and mechanical properties as set forth per the current ASTM A270, ASME SA 249, and ASME SB 676 specifications.

To discuss your application or if you have questions about AL-6XN tubing, give us a call at 800.654.5635.

  

Specifications
  • Full line stencil on tube OD
  • Plastic sleeved & capped on polished ID
    & OD tubing
  • Tubing provided in random lengths, not less than 17'—lengths of 20' ± 1.0" are typical
"-P7" Finish Part Number Nominal Size Finish ID/OD
T6XN-0.5X.065-W-P7 1/2" OD X 0.065" wall 32Ra MP/150 grit MP
T6XN-0.75X.065-W-P7 3/4" OD X 0.065" wall 32Ra MP/150 grit MP
T6XN-1.0X.065-W-P7 1" OD X 0.065" wall 32Ra MP/150 grit MP
T6XN-1.5X.065-W-P7 1 1/2" OD X 0.065" wall 32Ra MP/150 grit MP
T6XN-2.0X.065-W-P7 2" OD X 0.065" wall 32Ra MP/150 grit MP
T6XN-2.5X.065-W-P7 2 1/2" OD X 0.065" wall 32Ra MP/150 grit MP
T6XN-3.0X.065-W-P7 3" OD X 0.065" wall 32Ra MP/150 grit MP
T6XN-4.0X.083-W-P7 4" OD X 0.083" wall 32Ra MP/150 grit MP
Electropolish and other mechanically polished surface finishes are available